All patio coverings look good in summer. Whether they are any good becomes clear in February, when there is frost at night, meltwater runs into every joint during the day and someone has sprinkled road salt on the steps. You can read here which coverings can handle this and which ones are better to protect.
The fact that frost damages a covering is rarely due to the frost itself. Damage occurs when water penetrates the stone and freezes there. Freezing water expands, causing small pieces to break off the surface over time. The less water a surface absorbs, the better it will survive the winter.
Ceramics and porcelain stoneware
Good porcelain stoneware absorbs almost no water, which is why outdoor tiles are considered very frost-resistant. They are also insensitive to salt because nothing gets stuck in the material. It is important that the panels are specifically made for outdoor use and have a rough surface. Smooth interior panels become slippery when wet, even if they could withstand the frost.
Concrete slabs and paving
It's worth taking a look at the data sheet here. Good concrete products are resistant to frost and de-icing salt, and the manufacturer also states this. Cheap sales records don't always have this property. After a few winters, the upper layer comes off and the surface becomes rough and patchy. Road salt generally tolerates concrete less well than ceramics; it attacks the surface. If you are planning to do something new anyway, you should ask for exactly this information when purchasing.
Natural stone
Granite and other hard rocks are robust in winter. Softer stones such as some sandstones, limestone or travertine absorb water and then burst more easily. There is also salt: it can soak into porous stones and later emerge as a white veil. When it comes to natural stone, a lot depends on the type. When purchasing, ask specifically about the frost resistance of the panel you have chosen.
Wood and WPC
Wood doesn't mind frost much, but moisture stays around longer, and algae on wood is really slippery in winter. A wooden terrace should therefore be brushed clean before the first frost. WPC is easier to care for, but can expand and contract slightly when there are large temperature differences. When installing, leave the joints specified by the manufacturer free, otherwise the boards will curl.
Water must be able to drain away
No covering helps if there is water on the terrace. A slope of about one to two percent away from the house ensures that it drains before it freezes. If there is a puddle on the surface after rain, it turns into a sheet of ice in winter, and it is precisely there that the frost damages the stone the most. The substructure also plays a role: a permeable layer of gravel underneath allows water to drain away, while a dense, clayey subsoil holds it in.
Clear snow without destroying anything
A slider made of plastic or with a rubber lip protects the edges. Metal shovels scratch porcelain stoneware and soft natural stones. To prevent slipperiness, it is better to use sand, grit or granules with the Blue Angel label rather than salt. It doesn't look nice in spring, but it's easy to sweep up and doesn't put a strain on the surface or beds. Many communities also restrict road salt. How this is regulated in your case is stated in the local statutes.
What else you can do before winter
Sweep leaves and dirt from the area so that it doesn't stay wet for days. Check joints and fill loose areas. Mark wobbly panels so they can be reset in the spring before water runs underneath. And don't leave furniture on damp surfaces, otherwise your feet will freeze.
We have described here whether an old terrace can still be saved or whether it is worth building a new one:Renovate or build a new terrace
You can find a direct comparison of the coverings here:Ceramic, WPC and natural stone in comparison